TorcStark®
Teléfono: +86 531 82899663
Correo electrónico: torcstark@gmail.com

Intelligent Lifting Hydraulic System

HogarIntelligent Lifting Hydraulic System
TorcStark®

﹡ The intelligent lifting hydraulic system is computer-controlled overall lifting and lowering. The technology adopts flexible steel strand bearing, lifting steel strand hydraulic jack cluster, Computer control, hydraulic synchronous lifting principle, combined with modern construction technology, to achieve large tonnage, large span and large area of super large components at high altitude
The overall synchronization rises and falls.
﹡ By extending the combination of lifting equipment, the lifting weight, span and area are not limited;
﹡ The flexible steel strand is used for load-bearing, as long as there are reasonable load-bearing lifting points, the lifting height is not limited;
﹡ The lifter anchor has reverse movement self-locking, which makes the lifting process very safe, and the components can be locked reliably for a long time at any position during the lifting process;
﹡ The equipment is small in size, light in weight and large in carrying capacity, especially suitable for lifting large-tonnage components in small spaces or indoors;

Working Principle

﹡The lifting technology of the lifting jack is derived from the principle of concrete column tension. Think of the hoisting jacks as a set of linear winches. In the lifting jack, a bundle of wire ropes or strands is passed through a hydraulic cylinder, above and below the cylinder is an anchoring system that uses wedges to clamp the strands. When the clip is anchored, The jacking up or retraction of the cylinder is performed to raise or lower.
﹡The cylinder is driven by a hydraulic power pack (electric or diesel). The lifting system software program synchronizes the movements of the lifting jacks and adjusts the make adjustments to the load movement.
﹡There are two types of wire ropes for the hoisting jack: 15.2mm standard wire rope and 17.8mm dense wire rope. The dynamic load of the 15.2mm steel cable can reach 110kN, the dynamic load of 17.8mm steel cable can reach 155kN when working. The amount and type of wire used by the jack determine the load it can safely work with weight. For lifting applications, the safety factor (ratio of breaking load to working load) for lifting jacks is 2.5.

Tabla de especificaciones

Steel Strand Diameter(mm)Lifting Force(KN)ModeloNumber of Steel StrandsStroke(mm)Piercing Hole Diameter(mm)Weight(Kg)Dimensions(mm)
15.21000JK-TSD-100C10300φ160927φ435×2280
2040JK-TSD-2000F19300φ1761300480×480×2460
3500JK-TSD-3500A31300φ2252000φ620×2580
17.8618JK-TSD-600B4500φ110720415×480×2670
750JK-TSD-7505500φ125925520×450×2780
1700JK-TSD-170012500φ1951800625×625×2220
2000JK-TSD-2000H16500φ2402250740×700×2980
2300JK-TSD-230016500φ2402180φ590×2800
2500JK-TSD-250018500φ2402460765×710×3000
3500JK-TSD-3500C23500φ2903600φ620×2580
4500JK-TSD-4500A31400φ3003980φ820×2860
6120JK-TSD-6000A42400φ4056830φ920×3300
9110JK-TSD-900066500φ480150001370×1560×3810

Caso

TorcStark®
TorcStark®

Ponerse en contacto

Para todas las consultas de servicio, complete el formulario y nos pondremos en contacto con usted lo antes posible.

    • Todos los productos están diseñados para superar los estándares de datos globales para equipos hidráulicos de alta presión.
    • Cada producto se someterá a rigurosas pruebas físicas antes del envío para garantizar la calidad del producto.
    • Todos los productos han pasado la inspección de calidad de ISO9001 y EU CE y otras instituciones.
    • Proporcione herramientas seguras y confiables y un servicio posventa líder en la industria, todos los productos vienen con un servicio de garantía integral de 12 meses.
    • El stock es suficiente y se puede entregar rápidamente después de que el usuario realiza un pedido.
    • Se utiliza un inventario suficiente de piezas de repuesto para un mantenimiento rápido y una operación del producto a largo plazo.